Built with bend-insensitive single-mode OS2 fibres (ITU-T G.657A2 compliant), DConnect’s Indoor Distribution Tight Buffer Fibre Optic Cable solution ensures minimal signal loss even in tight bends and confined spaces.
Reinforced with aramid yarn strength members, so even if the cable is being pulled through conduits, pressed under cable trays, or subjected to accidental impacts during installation, it maintains its integrity and keeps your network running seamlessly. The cable’s tight buffer construction makes termination and splicing easier, eliminating the hassles.
The cable can be used for fibre distribution in enterprise networks, enhances connectivity between intermediate and main distribution frames in telecom rooms, enables fibre-to-the-desk (FTTD), and works seamlessly in riser installations and indoor cable trays, and conduits.
Key Features
- Single-mode OS2, Bend-Insensitive: ITU-T G.657A2-compliant fibre minimises signal loss in tight bends.
- LSZH Jacket: A yellow LSZH sheath enhances fire safety and deployment visibility.
- Easy Identification: A bright jacket ensures quick tracing in dense cabling.
- Aramid Yarn Reinforcement: High tensile strength protects against stress and impact.
- Flexible Pathway Compatibility: Compliant with IEC 60332-1, IEC 60754, and IEC 61034 fire safety standards.
Technical Specifications
Here’s the table that describes the indoor distribution tight buffer fibre optic cable technical specifications:
| Parameter | Specifications |
| Fibre Type | Single-mode OS2 (ITU-T G.657A2) |
| Construction | Tight buffer with an aramid yarn strength member |
| Jacket Material | Low Smoke Zero Halogen (LSZH) |
| Jacket Colour | Yellow |
| Cable Weight | Approx. 20 – 50 kg/km* |
| Minimum Bend Radius | 10 x OD (installation), 5 x OD (operation) |
| Tensile Strength | ≥ 600N* (Short term), ≥ 200N* (Long term) |
| Crush Resistance | ≥ 1000 N/100 mm* |
| Operating Temperature | -20°C to +70°C |
| Installation Temperature | -10°C to +50°C |
Applications
- Commercial and Residential Buildings: Used for vertical risers and horizontal backbone cabling to distribute fibre between floors and rooms.
- Data Centres: Supports high-density fibre connections between racks, optical distribution frames (ODFs), and core networking equipment
- FTTD and FTTX Deployments: Provides fibre access from the main distribution point directly to homes, buildings, MDUs, or even individual desks and user terminals.
- Telecommunication Rooms: Reliable connection between intermediate distribution frames and main distribution frames
- Riser Installations: Runs safely through vertical shafts with LSZH compliance
As a prominent Indoor Distribution Tight Buffer Fibre Optic Cable supplier in the UAE, this solution is suitable for backbone cabling inside buildings (both vertical and horizontal), data centres, and FTTX projects.
Available Configuration
- Part Number: FC-24-LZ-YW-OS2-TB-AY
- Single-mode OS2 (ITU-T G.657A2)
