DConnect’s Elevator Travelling Cable is a hybrid solution with 4-core fibre and 2-core copper, engineered for seamless data, monitoring, and power transmission while offering high flexibility and strong mechanical durability.
The cable uses multiple φ900μm tight-buffered optical fibres as the optical transmission medium, and two metal wires are added as the load-bearing element. The metal wires provide the strength to the cable required during the travelling process and the unexpected tension during the installation process.
As an Elevator Traveling Cable 4 Core Fibre 2 Copper Wire Hybrid Supplier in the UAE, this optical cable meets the requirements of the elevator: soft and wear-resistant. It can be used to lift the car and the motor room with excellent reliability. Also, it moves up and down along with the lift car to transmit data and monitoring signals.
Key features
- Supplies low-voltage power and high-speed data to devices such as cameras, sensors, wireless access points, phones, and monitors.
- Built with 900μm tight-buffered optical fibres for easier handling and simplified routing during installation.
- Soft yet wear-resistant fibres deliver strong mechanical protection and a long operational life.
- Designed for continuous vertical movement, the fibres maintain performance under repeated bending.
- SmartArt numbering system allows customisation with specific conductor counts, fibre strands, colours, and lengths.
- Hybrid cable replaces multiple separate runs, minimising labour and cable pulls.
- One hybrid cable reduces inventory complexity compared to managing separate power and data cables.
- Corrosion-resistant, UV-stable, flame-retardant outer jacket improves safety and longevity.
- Optical fibre ensures immunity to electromagnetic interference (EMI) for reliable data transmission.
Technical specifications
Here’s a table that describes the Elevator Traveling Cable 4 Core Fibre 2 Copper Wire Hybrid technical specification:
| Testing Aspect | Testing Standard | Test Condition | Acceptance Criteria |
| Tensile loading | IEC 60794-1-E1 | Load – 1000N, Duration – 1 min | Attenuation @1550nm ≤ 0.1 dB, No fibre/jacket damage |
| Crush resistance | IEC 60794-1-E3 | Load – 1000N/100mm, Time – 1 min, Repetition – 10 times | Attenuation @1550nm ≤ 0.1 dB, No fibre/jacket damage |
| Impact resistance | IEC 60794-1-E4 | Height – 1000mm, Weight – 450g, Points: 5, Frequency – 1/point | Attenuation @1550nm ≤ 0.1 dB, No fibre/jacket damage |
| Repeated bending | IEC 60794-1-E6 | Angle – ±90°, Weight- 1.5kg, Duration – 100 seconds, Relax – 10seconds | Attenuation @1550nm ≤ 0.1 dB, No fibre/jacket damage |
| Torsion testing | IEC 60794-1-E7 | Length – 4m, Test Time – 10 min, Relax – 10seconds | Attenuation @1550nm ≤ 0.1 dB, No fibre/jacket damage |
| Water penetration | IEC 60794-1-F5B | Pressure Head – 1m, Specimen Length – 3m, Duration – 24 hours | No water leakage at the cable end |
| Temperature cycling | IEC 60794-1-F1 | Steps: +20°C → -20°C → +60°C → +20°C, 12 hours/steps, 2 full cycles | Attenuation @1550nm ≤ 0.1 dB, No fibre/jacket damage |
| Static and dynamic bending | ≥ 10 and 20 times the cable out diameter |
Applications:
- Elevator Systems: Transmits data and power for control, monitoring, and safety.
- Building Automation: Connects cameras, sensors, access control, and communication.
- Security & Surveillance: Powers and connects CCTV, access points, and alarms.
- Low-Voltage Communication: Links phones, monitors, and low-voltage equipment.
- Indoor & Outdoor Installation: Fits plenum, riser, and mixed environments with sunlight or moisture.
- Industrial Applications: Delivers reliable performance with flexibility and EMI immunity.
The DConnect elevator traveling cable is manufactured and tested to meet the industry standards. To ensure efficient elevator communication systems, the cable is IEC 60794, EN 50267, ISO/IEC 11801, EN 50306, RoHS Compliant, and REACH Compliant.
Available Configuration
- Part Number:FC–04-LS-B-OS2- EHT
- Colour: Black
